How To Carve Wood – A Start Up Guide For Beginners

The most nerve-wracking thing about wood-related project is not about the result, but the process of making it. For the early project makers, even the preparation stage is quite intimidating. They would waver for not knowing which knife is used in the project, or which wood to use. Since these points are important to know, learning about them would be helpful.

Recognizing the Wood

The item you are going to work with is wood. Therefore, it becomes the first priority for any newbie carpenter. To start with, there are two types of woods: softwood and hardwood. A little trick while choosing in the market: avoid any ring or knot. Both will disturb your carving process.

  • Basswood

This material is considered the friend of newbie’s first project. It has soft composition and fine grain. The color is creamy, and the price is affordable even for student pocket.

  • Balsa

Another choice for soft, fine grain wooden board is Balsa. It is often used as a base for airplane model.

  • Pine

The composition of pine is softer compared to the other two boards mentioned previously. The grain is mostly white, but you can fine some with yellow colored ones.

  • Butternut

Among the other four, Butternut board appears differently. The grain is coarser and has darker color. Working with this wood, you need to do things in one go.

Purchasing Knife

After you purchase the right wood, next weapon to stock is a proper knife. Many low budget beginners are using pocket knife. Certainly, it couldn’t be compared to the one specifically designed for whittling. The price is under $30, unless you pick the one with the highest quality.

Keeping A Sharpening Stone

If you steadily carve the woods, in one time the knife edge will be blunt. For the best result, you will need sharp knife for carving. Therefore, keeping a sharpening stone within your arm reach would be helpful.

Wearing Glove

For a first timer, almost everything is a new experience. To keep yourself safe, it is suggested to wear a pair of gloves cover both palms. Bear with the uncomfortable grip for a moment. When you are familiar with whittling technique, you could take off the gloves.

To make a great product, you need a proper weapon to begin with. Make sure you pick an appropriate knife and has sharpened the edge. To ensure your own safety, pay full attention to the ongoing carving project. Just a second of daydreaming may cost you a finger. While pushing the knife on the wood, you should also consider the composition of the wood. Happy carving!